1. This wall panel machine is a nonstandard wall panel equipment. It has multi usage and can produce the different size nonstandard lightweight wall panel. The thickness can be adjusted from 120 to 150mm, width 600mm, you just need to change and adjust little parts can do it.
2. The raw material can be fly ash, slag, coal gangue, pumice, shale, haydite etc. Of one or more, add a certain proportion of ordinary cement, expanded perlite as raw material, you can add 1.6-4mm low carbon steel wire in the wall panel as support strengthened material.
3. The entire machine uses the anticorrosion technology, never rust. Long service life has been appreciated by lots of our clients.
4. Flexible operation and high efficiency. We can produce various kinds of concrete wall panel forming machines according to customers' demand.
Features:
1. High efficiency and easy operation.
2. Change the industrial waste into wealth.
3. Heat preservation and sound insulation.
4. Lightweight.
The production site:
Production site use trams (channel steel orientation) or trackless (Ground sizzling orientation), the user can place order according to required.
The supporting machine:
1.1 set lightweight wall panel making machine
2.1 set steel bar tension machine,
3.1 set board cutting machine,
4.1 set dumper
5.1 set concrete mixer
6.1 set hammer crusher&
v id="StyleTableProd">
Model
|
JQT12-14
|
JQT12-15
|
Panel width(mm)
|
595± 2
|
595± 2
|
Panel thickness(mm)
|
120± 1/140± 1
|
120± 1/150± 1
|
holexdiameter(mm)
|
5x58
|
5x85
|
Speed(m/min)
|
1.1-1.7
|
1.1-1.7
|
Motor(kw)
|
Y132S-4
|
Y132S-4
|
Vibrator(kw)
|
ZW10B-1.1
|
ZW10B-1.1
|
Dimension(mm)
|
2560x950x980
|
2560x950x980
|
Weight(kg)
|
1300
|
1300
|
&
